I replaced the A/C clutch on our 99 Mitusbishi Montero Sport. After
installing, when I push the a/c button, I do not hear the clutch engage like
I used to prior to replacement. I think the possible problems are
below. Can you comment on what you think?
1. I might have put in too many shims and the gap is too big. The original
clutch had one shim and I put in 3.
2. Wiring is not hooked up right. However, the 2 harness plugs seem to rule
this out.
3. The system is discharged. This is probably not putting any compression
pressure on the unit and it is actually engaging but you cannot hear it.
thx, Bill
www.azautofair.com
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.asp...ubishi/200609/1