Go Back   Cars Lounge > Cars Lounge > Hyundai
User Name
Password


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-03-2006, 09:37 PM
Big Al Big Al is offline
Junior Member
 
Join Date: Apr 2005
Posts: 121
Default 2000 Accent MAF problems

Why would the MAF sensor fail about every six months? What could cause this?
I've checked the wiring, connectors and everything else I can think of. It
does not look oily or dirty. On number three and it's out after six months.
Number two lasted two months, thought it was just a bad one. When number one
first started showing signs of failure we cleaned it, and it seemed OK for a
while. Then CEL came on and were still at it.

Al


Reply With Quote
  #2  
Old 10-04-2006, 09:13 AM
hyundaitech hyundaitech is offline
Junior Member
 
Join Date: Oct 2004
Posts: 1,438
Default 2000 Accent MAF problems

Contamination is typically the only thing that will "cause" an air flow
sensor to fail. If it isn't the CEL that is the "sign of failure," what
are the signs of failure that make you think the air flow sensor is having
a problem?

Reply With Quote
  #3  
Old 10-04-2006, 10:11 PM
Big Al Big Al is offline
Junior Member
 
Join Date: Apr 2005
Posts: 121
Default 2000 Accent MAF problems


"hyundaitech" <notpublic@not.public.com> wrote in message
news:29f8923c5ae2426022fcc4010185fcdc@localhost.ta lkaboutautos.com...
Quote:
Contamination is typically the only thing that will "cause" an air flow sensor to fail. If it isn't the CEL that is the "sign of failure," what are the signs of failure that make you think the air flow sensor is having a problem?


Sorry. It sets the CEL and shows a P1128 code. If I reset it, comes back on
in a day or two.

Al


Reply With Quote
  #4  
Old 10-05-2006, 08:40 AM
hyundaitech hyundaitech is offline
Junior Member
 
Join Date: Oct 2004
Posts: 1,438
Default 2000 Accent MAF problems

While the air flow sensor is the leading cause of this code, it's important
to check to make sure you don't have any vacuum leaks and that there are no
leaks between the air flow sensor and the throttle body.

The P1128 code simply means that the ECM has to hold the injectors open
longer than it thinks it should to achieve proper mixture. Possible
causes would be:
1. Vacuum leak (especially in PCV hose)
2. Air bellows not secure on air flow sensor or throttle body
3. Air bellows broken or otherwise leaking
4. Improper oxygen sensor readings
5. Low fuel pressure (very rare)'
6. Improper air flow sensor readings.

If you haven't been there yet, there's a very nice TSB you can view at
www.hmaservice.com which gives air flow readings that relate to engine rpm
and tps values. I'd recommend looking at it if you haven't already done
so. It's TSB # 01-36-022.

If you do indeed have another air flow sensor problem, then, like I said
previously, I'd suspect some sort of contamination issue. Perhaps even
excessive engine oil entering the bellows from the breather hose and
running down onto the sensor element.

Reply With Quote
  #5  
Old 10-06-2006, 08:25 AM
Big Al Big Al is offline
Junior Member
 
Join Date: Apr 2005
Posts: 121
Default 2000 Accent MAF problems


"hyundaitech" <notpublic@not.public.com> wrote in message
news:8ec8f97150b6e2e2b0d584228b6a2ffc@localhost.ta lkaboutautos.com...
Quote:
While the air flow sensor is the leading cause of this code, it's

important
Quote:
to check to make sure you don't have any vacuum leaks and that there are

no
Quote:
leaks between the air flow sensor and the throttle body. The P1128 code simply means that the ECM has to hold the injectors open longer than it thinks it should to achieve proper mixture. Possible causes would be: 1. Vacuum leak (especially in PCV hose) 2. Air bellows not secure on air flow sensor or throttle body 3. Air bellows broken or otherwise leaking 4. Improper oxygen sensor readings 5. Low fuel pressure (very rare)' 6. Improper air flow sensor readings. If you haven't been there yet, there's a very nice TSB you can view at www.hmaservice.com which gives air flow readings that relate to engine rpm and tps values. I'd recommend looking at it if you haven't already done so. It's TSB # 01-36-022. If you do indeed have another air flow sensor problem, then, like I said previously, I'd suspect some sort of contamination issue. Perhaps even excessive engine oil entering the bellows from the breather hose and running down onto the sensor element.


Thanks for the help. I'll start looking.

Al


Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -8. The time now is 04:00 PM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Style Copyright © 2003 - 2004 vBStyles.com

MyLounge.com Site Map
Forum: Cars, Cell Phone, Database, Games, Home Improvement, IT, Music, School, Sports, Web Design, Web Server, Weight Loss

The MyLounge.com forum is intended for informational use only and should not be relied upon and is not a substitute for any advice. The information contained on MyLounge.com are opinions and suggestions of members and is not a representation of the opinions of MyLounge.com. MyLounge.com does not warrant or vouch for the accuracy, completeness or usefulness of any postings or the qualifications of any person responding. Please consult a expert or seek the services of an attorney in your area for more accuracy on your specific situation. Please note that our forums also serve as mirrors to Usenet newsgroups. Many posts you see on our forums are made by newsgroup users who may not be members of MyLounge.com Term of Service